Bulldozer Seat in Olympia - attempting to acquire OEM or aftermarket Loader Attachments that can be shipped very quickly. Our dependable Olympia team of parts specialists are standing by to help you locate the components you require.
Propane powered forklifts are normally utilized in warehouses. The forklift is designed with the propane tank mounted at the back of the operator. The tanks, that look a lot like beer kegs, need to be replaced periodically as they have a limited lifespan. Forklift operators should always use care when handling propane tanks. Compressed gases are very dangerous, especially because the gas is flammable. Use care when replacing and removing propane tank to prevent being injured.
1 To change a propane tank, first stop the forklift while leaving the engine running, and turn off the valve on the tank. Let the forklift run until the engine dies. This procedure burns off the gas in the transfer hose that connects the tank and the engine. Before taking the second steps, wear the proper safety equipment, like for instance insulated gloves made of either leather or neoprene. It is really important for you to protect your skin from contact with the compressed gas, which is very cold.
2 Disconnect the hose from the tank and take the holding straps off to remove the tank. When putting in a new tank, tighten the nut to reconnect the holding straps and to reattach the hose at the valve of the tank.
3 You can check for leaks by applying soapy water to the valve and slightly opening it. Leaking gas would cause bubbles to froth around the value. If this occurs, check the valve area and the connection hose at the nut. The connecting nut must be re-tightened if you detect any leaks around the area of the valve, and after that perform the leak checking process all over again. Persistent leaks mean that the connecting hose and nut will have to be replaced. Then again, if replacing the hose and nut still does not stop the leak, the tank must be replaced.
4 Open the valve all the way to allow the gas to fill the connecting hose. Afterward you could start the forklift and continue operating.
Linden Comansa offers its clients the LC 1600 series, since the year 2011. This series of tower cranes is made up of models 16 LC 220, 16 LC 185 and 16 LC 260. These units are available in different versions of maximum load. The design of the LC 1600 series enables Comansa to keep their fundamental premises, like easiness of assembly and transport and modularity.
This particular series has a load capacity of 8 to 12 tons. The LC1100 cranes provide a 5 to 8 ton load capacity, whilst the larger LC2100 model supports loads from 12 to forty eight tons. In addition, the LC1600 family brings together the benefits of both series which shares various factors.
The family of tower cranes that has been engineered with every advantage known and proved by Linden Comansa's Flat-Top modular system is the LC 2100. This series incorporates many innovations in the particular machine.
The LC 2100 series has 4 Flat-Top crane models: the 21 LC 290, 21 LC 550 and the 21 LC 400. The newest addition to the series is the 21 LC 750. The 21 LC 750 crane is the biggest in the series. It is outfitted with eighty meters of jib length and 7 tons of jib-end load. This tower crane provides a maximum load of forty eight tons.
The LC3000 series by Comansa is formed by 2 models: the 30 LC 1100 and the 30 LC 1400. These two models are also in 3 different versions with different load capacities. The ranges of load capacities are 32, 48 and sixty four tons or ten thousand five hundred fifty; one hundred five thousand eight hundred twenty and 141,090 pounds. The largest Flat-Top tower cranes have mainly been designed for public works, heavy industry, construction and mining applications.
The Linden Comansa company has produced large capacity cranes for a lot of years. Since designing this series, the overall delivery and manufacturing timeframes are much shorter now. The business has maintained highly competitive pricing for their machine.
